So you've picked the perfect tile... but how are you going to lay it out? By using an interesting pattern or layout technique, you can elevate your design, polish your space, and add to the resale value of your home.
We'll help you pick the right tile and the right pattern in a free in-store design consultation! Schedule an appointment today: 253-872-0449 or email@example.com
We always recommend dry-fitting your pattern to think about your cuts in advance and to make sure you like the pattern. With an installation this permanent, why wouldn't you want to lay things out first?
Take some time to look at finished rooms and get ideas for what can be done in your space. Take into consideration the number of cuts needed for a pattern, how many grout lines you'll have (and how wide you want them), and if anything will be obscuring the pattern (area rugs or furniture on a floor, appliances in front of a backsplash, etc.).
Is your room long and narrow? Is it full of lots of obstacles and angles? Where will your grout lines fall? Where will you make cuts?
By setting aside some time to plan in advance, your installation will proceed smoothly and you'll feel more confident when making decisions.
The most common and easiest tile layout, laying tiles in a grid is very simple. Setting your tiles square with a corner will minimize the number of cuts needed. Unfortunately, this pattern can look boring or sterile when used with a plain, neutral tile.
The key to this pattern is to make sure you have no "slivers" (thinly cut tiles) in visible areas, as this looks shoddy and unprofessional. Dry-setting your tiles is very important when your lines are parallel to your walls, as any bad cuts or odd angles will be highlighted by this pattern. If your layout results in a full tile on one end of the room and a thin cut tile on the other, try offsetting the design by half a tile so you have slightly over half a tile on both ends of the room.
A Tile Lines Tip: Most houses aren't square. Using a level on wall layouts will help prevent a dizzy "everything's slightly slanted" look. For floors, look at where your cuts will be. Instead of ending up with a small cut piece slowly getting wider, offset your pattern by half a tile. A half tile that's slightly wider at one end is less noticeable than a thin sliver tile that's slightly wider.
This isn’t a specific pattern; it’s a layout technique. Any pattern can be turned at an angle to instantly create a more dynamic, interesting look.
The diagonal pattern can make a small room look bigger. If your walls aren't perfectly square, a diagonal layout will hide imperfections.
However, because the tiles no longer line up with your walls, setting tiles on the diagonal increases the number of cuts you have to make at the perimeter of your installation.
Take any size square or rectangle tile, lay them in rows and shift each row to create an offset pattern.
The offset/brick pattern has several potential effects.
A 50/50 offset (the most common brick/running bond pattern) creates a strong, traditional look.
A varied offset (40/60, 30/70, etc.) creates a softer, more natural look.
An irregular offset laid vertically on a wall can create an organic waterfall or bamboo effect. If you plan this layout correctly, you'll have very few cuts to make, as your cut piece from one row can start the next row instead of being tossed in the garbage.
If you're installing larger tiles with a long shape (6x24" tiles, wood plank tiles, etc.), it's recommended that you don't use a 50/50 offset, as these tiles can have a slight bow in them. A 50/50 offset will put the highest point of one tile next to the lowest point of another tile, creating lippage. Most tile manufacturers suggest a 30/70 offset or less for their long tiles.
A Tile Lines Tip: If you use your cut pieces and scraps from one row to start the next row, you'll have very little waste at the end of the project. Use your scraps!
The pinwheel pattern, also known as "hopscotch", is more simple than it looks! Take any two rectangles or squares of different sizes, align them on one side, and repeat.
This pattern is a great way to incorporate two different materials into the same space and create a dynamic, varied appearance.
Use two sizes of the same product for subtle movement, or use a contrasting color or material for more of a decorative effect.
For the herringbone pattern, simply take any rectangular tile, turn one so that the two are perpendicular to each other, align them along one side, and repeat.
You are essentially creating an L-shape with your two tiles, and these L's will nestle next to each other for a simple repeating pattern.
Any size rectangle will work for the herringbone pattern, forming a dynamic zig-zag that works in both contemporary and traditional settings.
The chevron pattern, like the herringbone, creates movement with rhombus shapes lining up to form an arrow-like effect.
This pattern's a bit trickier; unless your tile is specifically cut to create a chevron, you will have to cut each and every individual tile to create the dynamic points of the chevron pattern, which will be time-consuming and costly.
Some rectangular tiles will come with a chevron design printed on them for easier installation. Check to see if the pattern/color lines up from tile to tile.
Many mosaics come with chevron shapes built onto the mesh sheet, so you just have to cut the sheets at the perimeter of your installation.
Several new, modular lines come with cut rhomboids that can be used to create a chevron pattern.
It's becoming increasingly popular to take tiles with a linear look or long shape and create a woven appearance.
The weave can be modern, traditional, or transitional; the colors and tiles you choose greatly affect how successful this pattern will be. A tile with a strong pattern or strong linear look will create a bold weave, whereas a more subdued pattern will lead to a soft, subtle look.
Traditional, elegant, interesting, and timeless; this pattern utilizes several different shapes and sizes to create a random, varied appearance. As such, you'll need a tile product that was specifically designed with the Versailles pattern in mind, or else this pattern won't work!
If you have your heart set on this pattern, let us know and we can show you several lines of porcelain, travertine, limestone, or marble that have the correct size options for the Versailles. Some lines are even sold in pattern bundles to make constructing this pattern is as easy as possible.
We currently have 5 different Versailles patterns in stock: 2 porcelain, 2 travertine, and 1 slate.
Modular tiles are so fun!
There are some tile lines that come with multiple sizes, colors, and unique shapes that can be combined to create dramatic geometric installations or subtle, dynamic patterns.
Within these lines you may get rectangles, hexagons, triangles, or rhomboids with which you can create chevrons, weaves, cubes, stripes, or something completely different.
Use geometry to your advantage with modular tiles!
One easy way to create a unique space is with a unique shape! Uncommon shapes such as hexagons and diamonds are inherently interesting, and can be used to create a look that can't be replicated with right angles and rectangular tiles.
Hexagons can look very traditional in a black and white bathroom, or very contemporary in a neutral color palette and subtle textures.
An elongated hexagon creates a picket shape that can fit mid-century modern or shabby chic designs alike and create vertical or horizontal movement.
Diamond shapes can evoke a Renaissance harlequin for an old world aesthetic.
Curvy shapes evoke natural elements, like wind, waves, vines, and leaves.
Why not let your tiles do the work for you? Instead of a clever layout, a stylish design set in a traditional grid has a lot of visual impact with less effort put into layout.
Encaustic tiles have been around for centuries, but are experiencing a surge in popularity. Whether your pattern is bold and busy or subtle and soft, a patterned tile adds instant interest to a room.
There are many ceramic wall tiles with raised patterns currently available!
They create a sense of texture and depth while still being low maintenance and creating a clean look.
Patterns range from the organic
to the geometric
to decorative ornate detailing.
Add interest without busyness with 3D wall tiles! Read more in our Subway Tile series.
Your installation is a work of art; why not frame it? By using a decorative border, you can separate spaces, form focal points, create a faux-carpet look, or direct the eyes of your guests to points of interest.
Visit our Borders & Listellos page for more pictures and examples.
Add a few, add a lot... a deco or drop creates a focal point that adds a rich detail to your installation. Cut the corners off of some field tiles, and use pieces of the same granite on your countertop, pick a metal accent that matches your fixtures and appliances, or add a pop of color and shine with glass.
A Tile Lines Tip: If you like the look of drops but don't want to make all of those tiny cuts, consider using the hopscotch pattern above for a similar look without the multiple cut corners.
Appointments recommended for best possible service!
Monday - Saturday 9am - 5pm
CLOSED Thanksgiving Day
Thursday November 26th
Closing at 3pm Christmas Eve
Thursday December 24th
CLOSED Friday December 25th
& Saturday December 26th
CLOSED New Year’s Day
Open regular hours all other days
1531 Central Ave S
Kent, WA 98032
Found it elsewhere? Give us the opportunity to price match tile or installation supplies for you. We can usually beat contractor pricing by 10%.